Tools That Cut It: How To Choose The Best Diamond Blades For Your ProjectPhoto by Stanislav Kondratiev

 

Do you feel like it’s harder to make a dollar these days? Even big mobs like the clay brick manufacturing industry with annual revenue is at $870 million experienced slumps in growth.

And the competition continues to get tighter with each passing year.

This gets passed down the chain and you and I also need to to make better marketing decisions to attract more customers and better tools to get the job done faster. To stand above the rest. You can start by learning how to choose diamond blades to get the best value for your time and money.

Diamond blades can benefit your project since it decreases up to 50% of the force needed to cut hard or abrasive materials. Here are some tips on how to choose diamond blades for your needs:

The right choice will ensure that your project completes without losing efficiency. It increases your productivity, making your job more profitable.

Are you ready to learn the best diamond blades for your project? Read on and find out more:

1. Price

When looking at the worthiness of a diamond blade, ask the kind of price factor you’re more concerned about. Is it the initial price, or the cost per cut? If you’re doing small projects or only use it now and then, a lower-priced blade may work best with you.

Larger jobs that require regular usage need a higher-priced blade. Its initial cost might be high, but it’s less costly when looking at its long-term price tag. This is because it delivers the smallest cost per cut.

That’s why you need to remember that professionals should invest in diamond blades that deliver the lowest possible cost per cut or metre. As you progress in your profession, the initial price of the tool and the blade becomes a moot point.

2. Materials You’re Working With

The most important factor when choosing a blade, drill, or core is the type of materials you’re going to work with. If you match the diamond blade to the right materials, you’ll get a faster cutting speed while extending its overall lifespan.

Did you know that diamond blades are not made from real diamonds? They are made from “synthetic diamonds made with a high-temperature, high-pressure synthesis process.” This allows manufacturers to make the diamond cutting segments to cut specific materials.

The majority of diamond blades can cut a wide range of materials. But to get the best out of a blade, you need to match the blade to the material as closely as you can. A general rule is to think about the material you’ll cut most of the time.

Most materials will fall into one of these categories:

Hard Materials – Granite, Flint Concrete, Clay, Engineering Brick

When you’re cutting these materials, you need to use a soft bond. It releases the diamond grit at its maximum use. It does so without causing the blade to stop cutting due to overheating.

Medium-hard Materials – Concrete and Building Materials

You need to use a medium-hard bond type when working with these materials. It gives the right balance necessary to keep the full exposure of the diamond grit. At the same time, it ensures that the material will wear the bond at the right speed, extending its possible lifespan.

Extremely Abrasive Materials – Asphalt, 3 Newton Concrete Block

Soft materials like Asphalt requires the use of a hard bond. This holds the diamond grits for a longer period to ensure its productivity. If you use a soft bond, you’ll use the good diamonds too soon, decreasing its lifespan.

3. Wet vs. Dry Blades

There are diamond blades available for both wet- and dry-cutting situations. Don’t use a wet blade in dry environments since they’re designed to function while in a continuous water spray. If you use this blade dry, you could be a risk of injury as segments can detach from the blade if they get too hot.

But when cutting materials, wet-cutting is usually the best method to choose. The water will keep the blade cool, decreasing the build-up of heat and extend its lifespan. It also helps dampen the cutting fines and prevents dust from forming.

Some jobs will need dry-cutting methods. For example, the cold weather will make wet-cutting an impractical choice since you might end up freezing the blade or the saw.

When you’re using dry-cutting methods, don’t cut more than an inch or two deep each pass. Allow the blade to cool down at regular intervals. This ensures the blade won’t overheat and decrease its expected lifespan.

4. The Diamond Saw You’re Using

Aside from the materials, you need to match the diamond blade to the saw you’re using. In general, you need to match the blades’ performance with the horsepower of the saws. For example, you need to use low-performance blades on low-horsepower saws to make the most out of its lifespan.

The speed of the blade shaft is another factor you need to consider with horsepower. A saw that doesn’t rotate the blade at the right speed can make the blade wobble. This will result in excessive warping and wearing.

Most saws’ blade-shaft speed is higher than recommended speeds. But in normal sawing conditions, the actual speed of the shaft will become slower due to the load. That will make it fall within the right range of speed.

5. Your Source

Above all else, buy from a reputable supplier. Professional tool suppliers can guarantee authentic equipment that lasts and gets the job done.

This is why you shouldn’t order mock-up products from China or cheap second-hand options. The product itself might not work as intended. We’re here at paragontools.com.au to resolve those issues – you can trust that we provide nothing but the best diamond blades for all your needs.

Learn How to Choose Diamond Blades Today!

With these tips, you will now know how to choose diamond blades that will fit your project.

But why stop here? There are so many more tips and tricks to discover.

Don’t hesitate to try out other guides if you’re not sure about anything. You can also contact us today and we’ll gladly answer your questions and help you out.

Information contained on this page is provided by an independent third-party content provider. Frankly and this Site make no warranties or representations in connection therewith. If you are affiliated with this page and would like it removed please contact pressreleases@franklymedia.com